Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
Hydraulic Control Assembly - Antilock Brakes: Service Precautions
CAUTION:
-
When removing the modulator unit or after removing it, be careful not to turn it upside down or lean it excessively.
-
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
-
Take care not to damage or deform the brake lines during removal and installation.
-
To prevent the brake fluid from flowing, plug and cover the hose ends and joints with a shop towel or equivalent material.
-
Do not loosen the relief plug on the accumulator.
-
Be sure to drain the high-pressure brake fluid completely before performing the modulator function check, disposing of the modulator unit, or
replacing ABS pump motor.
-
Do not reuse the drained brake fluid.
WARNING: The modulator unit contains high-pressure brake fluid. Be sure to drain the high-pressure brake fluid completely from modulator
unit before performing the modulator function check, disposing of the modulator unit, or replacing ABS pump motor.
