honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

ABS Control Unit <--> [Electronic Brake Control Module] > < ABS Pump Motor Relay|Page 6321
Page 1
background image

Brake Fluid Pump Relay: Testing and Inspection

-

Remove the fail-safe relays and motor relay. See: Locations

Relay Identification

-

Check for continuity between the terminals C and D. There should be continuity.

-

Check for continuity between the terminals A and B. There should be continuity when the battery is connected between the terminals C and D.
There should be no continuity when the battery is disconnected.

ABS Control Unit <--> [Electronic Brake Control Module] > < ABS Pump Motor Relay|Page 6321