Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
5. Turn the head over and drive the guide out toward the camshaft side of head.
If a valve guide still won't move, drill it out with a 8 mm (5/16 inch) bit, then try again.
CAUTION: Drill guides only in extreme cases; you could damage the cylinder head if the guide breaks.
6. Remove the new guide(s) from the freezer, one at a time, as you need them.
7. Apply a thin coat of clean engine oil to the outside of the new valve guide. Install the guide from the camshaft side of the head; use the special tool
to drive the guide in to the specified installed height. If you have all 16 guides to do, you may have to reheat the head.
^
Valve Guide Installed Height:
-
Intake: 23.50-24.50 mm (0.925-0.965 inch)
-
Exhaust: 14.80-15.80 mm (0.583-0.622 inch)