Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
2.
Measure the intake valve clearance at the number two cylinder intake valve closest to cylinder number one.
^
If clearance is more than 0.40 mm, replace the cam holder. Refer to section 6 of the S/M.
^
If clearance is less than 0.40 mm, go to step 3.
3.
Adjust the valve clearance. If no adjustment screw threads are visible above the locknut, replace the cam holder. Refer to section 6 of the S/M.
Disclaimer
Technical Service Bulletin # 98-009
Date: 990413
Engine - Ticking Noise From The Valve Train
98-009
April 13,1999
Applies To:
1995-97 Accord-All Ohio-built LX and DX models
Ticking Noise From the Valve Train
(Supersedes 98-009, dated June 23, 1998)
SYMPTOM
Ticking noise from the valve train.
PROBABLE CAUSE
Intake rocker arm shaft clearance is excessive at the number two cylinder.
CORRECTIVE ACTION
Adjust the valve clearances, or replace the cam holder and the adjoining intake rocker arm shafts at the number two cylinder.
PARTS INFORMATION
Cam Holder kit:
P/N 12010-P0B-305, H/C 5686423
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed part:
P/N 12100-P0B-A00