Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
Switch Test
5. Check for continuity between the No. 16 terminal of the 20-P connector of the combination switch harness and body ground with the horn switch
pressed.
^ If there is continuity, the horn switch is OK.
^ If there is no continuity, go to step 6.
6. Remove the steering column covers.
7. Disconnect the combination switch harness 4-P connector from the cable reel.
Switch Test
8. Check for continuity between the No. 16 terminal of the 20-P connector and the No. 3 terminal of the 4-P connector.
^ If there is no continuity, replace the combination switch harness.
^ If there is continuity, go to step 9.
Switch Test
9. Carefully remove the cruise control set/resume switch cover by prying between the cover and the switch in the sequence shown.