Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
2. Loosely install the pump in the pump bracket with mounting bolts.
3. Install the pump belt.
CAUTION:
^
Make sure that the power steering belt is securely on the grooves of the pulleys.
^
Do not get power steering fluid or grease on the power steering belt or pulley faces. Clean off any fluid or grease before installation.
4. Adjust the pump belt.
5. Fill the reservoir to the upper level line.
NOTE: Take care not to spill the fluid on the body and parts. Wipe off any spilled fluid at once.
CAUTION: Always use Genuine Honda Power Steering Fluid-V or S. Using any other type of power steering fluid or automatic transmission
fluid can cause increased wear and poor steering in cold weather.
a. Start the engine, let it run at idle, then turn the steering wheel lock-to-lock several times to bleed air from the system.
