honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Steering Pump|Removal and Installation|Page 6736 > < Power Steering Pump|Removal and Installation|Page 6734
Page 5
background image

6. Remove the side plate and preload spring.

NOTE:  Replace the pump as an assembly if the side plate must be replaced.

7. Remove the O-rings from the side plate.

8. Remove the circlip, then remove the drive shaft assembly from the pump housing using a plastic hammer.
9. Remove the seal spacer and oil seal.

Power Steering Pump|Removal and Installation|Page 6736 > < Power Steering Pump|Removal and Installation|Page 6734