honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Stabilizer Bar, Sway Control > < Radius Rod <--> [Radius Arm]|Removal
Page 1
background image

Radius Rod: Service and Repair
Installation

CAUTION:  The vehicle should be on the ground before any bolts or nuts connected to rubber mounts or bushings are tightened.

NOTE: 

-

Wipe off the dirt, oil or grease on the threads before tightening the fasteners.

-

The right and left damper forks are not interchangeable. The left damper fork is marked with "V4L" while the right damper fork is marked with
"V4R".

-

The right and left upper arms are not interchangeable. The left upper arm is marked with "VL" or "VLG" while the right arm is marked with "VR"
or "VRG".

-

After installing the suspension arm, check the front wheel alignment, and adjust if necessary.

Stabilizer Bar, Sway Control > < Radius Rod <--> [Radius Arm]|Removal