honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Key Interlock Solenoid Test|Page 4902 > < Key Interlock Solenoid Test
Page 2
background image

Key Interlock Solenoid Test

2.  Disconnect the 8-P connector from the main wire harness.

Key Interlock Solenoid Test

3.  Check for continuity between the terminals in each switch position according to the table.
4.  Check that the key cannot be removed with power and ground connected to the No. 4 and No. 7 terminals.

^  If the key cannot be removed, the key interlock solenoid is OK.
^  If the key can be removed, replace the steering lock assembly (the interlock solenoid is not available separately).

Key Interlock Solenoid Test|Page 4902 > < Key Interlock Solenoid Test