Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
Constant Velocity Joint: Service and Repair
DISASSEMBLE
1. Remove the set ring from the inboard joint.
2. To remove the boot band, pry up the locking tabs with a screwdriver and raise the end of the band.
CAUTION: Take care not to damage the boot.
NOTE: Carefully clamp the driveshaft in a vise with soft jaws. If the boot band is the welded type, cut it off as shown.
3. Mark each roller and inboard joint to identify the locations of rollers and grooves in the inboard joint. Then remove the inboard joint on the shop
towel.
NOTE: Be careful not to drop the rollers when separating them from the inboard joint.
