Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2600003.png)
6. Release the clips (A, B) that hold the door panel (C) with a commercially available trim pad remover (D), then remove the door panel by pulling it
upward. Disconnect the security indicator connector (E) (driver's) and courtesy light bulb socket (F). Remove the door panel with as little bending
as possible to avoid creasing or breaking it.
7. Install in the reverse order of removal, and note these items:
-
Make sure the connectors and the courtesy light bulb socket are plugged in properly, and the rod is connected properly.
-
If applicable, install the regulator handle so it points forward and up at a 45 degree angle with the glass fully closed.
