Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2850001.png)
Cruise Control Unit: Testing and Inspection
SRS components are located in this area. Review the SRS components locations, precautions, and procedures before performing repairs or service.
1. Remove the driver's dashboard lower cover.
2. Disconnect the 14P connector from the control unit.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
