Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-637004.png)
11. Measure the inner diameters of the bearings for the front balancer shaft (A) and the rear balancer shaft (B).
Bearing Inner Diameter
Standard (New):
No.1 journal:
Front (C): 42.800 - 42.820 mm (1.6850 - 1.6858 inch)
Rear (D): 21.000 - 21.013 mm (0.8268 - 0.8273 inch)
No.2 journals front (E) and rear (F): 38.800 - 38.820 mm (1.5276 - 1.5283 inch)
No.3 journals front (G) and rear (H): 34.800 - 34.820 mm (1.3701 - 1.3709 inch)
Service Limit:
No.1 journal:
Front (C): 42.83 mm (1.686 inch)
Rear (D): 21.02 mm (0.828 inch)
No. 2 journals front (E) and rear (F): 38.83 mm (1.529 inch)
No.3 journals front (G) and rear (H): 34.83 mm (1.371 inch)
12. Calculate the shaft-to-bearings oil clearances.
BEARING I.D.-JOURNAL 0.D.= 0IL CLEARANCE
Shaft-to-Bearings Oil Clearances
Standard (New):
No.1 front journal, No.3 front and rear journals: 0.066 - 0.098 mm (0.0026 - 0.0039 inch)
No.2 front and rear journals: 0.076 - 0.108 mm (0.0030 - 0.0043 inch)
No.1 rear journal: 0.050 - 0.075 mm (0.0020 - 0.0030 inch)
Service Limit:
No.1 front journal, No.3 front and rear journals: 0.12 mm (0.005 inch)
No.2 front and rear journals: 0.13 mm (0.005 inch)
No.1 rear journal: 0.09 mm (0.004 inch)
