Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-664003.png)
16. Confirm that the clearance is equal all the way around with a feeler gauge.
Clearance: 0.5 - 0.8 mm (0.02 - 0.03 inch)
17. Clean and dry the right side cover mating surfaces. Apply a light coat of oil to the crankshaft and to the lip of the seal.
18. Apply liquid gasket, part No. 08718-0001 or 08718-0003, evenly to the block mating surface of the right side cover and to the inner threads of the
bolt holes. Install the dowel pins (A) and the right side cover (B) on the cylinder block.
NOTE: Do not install the parts if five minutes or more have elapsed since applying the liquid gasket. Instead, reapply liquid gasket after
removing the old residue.
19. After assembly, wait at least 30 minutes before filling the engine with oil.
Rear Shaft Retainer Torque
