Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-789002.png)
2.
Connect the PGM Tester to the car, and turn the ignition switch to ON (II).
3.
Turn on the PGM Tester.
4.
From the PROGRAM MENU, select 1: HONDA SYSTEMS SN 000.
5.
From the second PROGRAM MENU, select 1: HONDA SYSTEMS.
6.
From the VEHICLE CHECK screen display, verify the model, engine, and transmission data of the vehicle.
7.
Enter the VIN.
8.
Enter the vehicle's mileage.
9.
From the SYSTEM SELECT menu, select 1: PGM-FI.
10.
From the TEST MODE MENU, PGM-FI, select 6: INSPECTION.
11.
From the INSPECTION MENU, select 1: IDLE ADJUST.
12.
At the VEHICLE EQUIPMENT screen display of Is the vehicle equipped with an idle adjust screw? Select YES.
13.
Follow the idle speed adjustment instructions displayed on the PGM Tester.
14.
Test-drive the vehicle to confirm the repair.
Disclaimer
Technical Service Bulletin # 99-064
Date: 991221
Hesitation During Acceleration
99-064
December 21, 1999
Applies To:
1998-99 Accord - EX and LX with L4 Engine
Hesitation During Acceleration
SYMPTOM
A slight hesitation when accelerating from a complete stop.
PROBABLE CAUSE
Incorrect base engine idle.
CORRECTIVE ACTION
Adjust base engine idle using the PGM Tester.
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed part:
P/N 37820-PAA-L73
H/C 5859889
