Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-1368003.png)
3.
Anchor the long vacuum hose by attaching it to the rear intake air duct clip and to the cruise control hose.
4.
Route the new vacuum hose to the fuel pressure regulator. Attach the hose to the three rear clips on the engine wire harness cover.
A/T WITH CRUISE CONTROL
1.
Remove and discard the vacuum hose from vacuum port A. This hose supplies vacuum to the rear engine mount control solenoid.
2.
Connect the short vacuum hose from the top of the Y fitting to vacuum port A.
