honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Engine Control Module:|03-001 > < Engine Controls - MIL ON/DTC P1164 Stored|Page 3092
Page 3
background image

If you are working on a 2000 A/T model, inspect the part number on the PCM in the vehicle.

Is the part number 37820-PAA-319?

YES - This service bulletin does not apply; continue troubleshooting.
NO - Go to REPAIR PROCEDURE B.

2001-2002 SULEV

THIS VEHICLE CONFORMS TO CALIFORNIA REGULATIONS APPLICABLE TO 2000 MODEL YEAR NEW SULEV PASSENGER CARS,
THIS VEHICLE MAY ONLY BE INTRODUCED INTO COMMERCE FOR SALE IN CALIFORNIA

If you are working on a 2001-02 A/T model, inspect the part number on the PCM in the vehicle.

Is the part number 37820-PAA-L97?

YES - This service bulletin does not apply; continue troubleshooting.
NO - Go to REPAIR PROCEDURE B.

REPAIR PROCEDURE A

Replace the air/fuel ratio sensor (sensor 1).

REPAIR PROCEDURE B

1.

1998-2000 ULEV models only - Replace the air/fuel ratio sensor (sensor 1).

2.

Replace the ECM/PCM. Refer to service bulletin 00-049, Immobilizer System (Type 2).

^

For 1998-99 models, you need all of the working ignition keys.

^

For 2000-02 models, download the immobilizer transponder codes to the HDS before replacing the ECM/PCM.*

 

Disclaimer

All Technical Service Bulletins for Engine Control Module:|03-001 > < Engine Controls - MIL ON/DTC P1164 Stored|Page 3092