Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
19. Disconnect the SRS main harness 18P connector (A) from the SRS unit (B).
SRS Main Harness 18P Connector (Wire Side Of Female Terminals)
20. Connect a voltmeter between the No.6 terminal (+) of the SRS main harness 18P connector and ground.
21. Turn the ignition switch ON (II), and measure voltage. There should be 0.5 V or less.
Is voltage as specified?
YES - Faulty SRS unit; replace the unit.
NO - Short to power in the BLU wire of the SRS main harness; replace the harness.