Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-300001.png)
Headlamp Dimmer Switch: Service and Repair
1. Remove the dashboard lower cover and steering column covers.
2. Disconnect the 14P connector (A) from the combination light switch (B).
3. Remove the two screws (C), then pull out the switch (B).
4. Inspect the connector terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, check for continuity between them in each switch position according to the tables.
-
If there is no continuity, replace the switch.
