Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Accessory Power Socket: Service and Repair
1. Remove the center console.
2. Disconnect the 2P connector.
3. Inspect the connector terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
4. Turn the ignition switch ACC (I), and check for voltage between the No.1 and No.2 terminals.
-
There should be battery voltage.
-
If there is no battery voltage, check for:
-
blown No.8 (7.5 A) fuse in the driver's under-dash fuse/relay box.
-
faulty accessory socket relay.
-
poor ground (G501, G581).
-
an open in the wire.
-
blown No.9 (20 A) in the passenger's under-dash fuse/relay box.
5. Remove the housing (A) and socket (B).