Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2191016.png)
72. Grease the sliding surface of the rack guide (A), and install it onto the gearbox housing.
73. Apply sealant all around the threads on the rack guide screw (B), then install the spring (C), rack guide screw and locknut (D).
74. Adjust the rack guide screw. After adjusting, check that the rack moves smoothly by sliding it right and left.
75. Install the stop washer (A), and screw each rack end (B) into the rack while holding the lock washer (C) so its tabs (D) are in the slots (E) in the
end of the rack.
76. Hold the flat surface sections of the right side steering rack with a wrench, and tighten the both rack ends. Be careful not to damage the rack
surface with the wrench.
77. Bend the lock washer back against the flat spots on the rack end joint housing.
