Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
8. Remove the 6 mm brake disc retaining screws (A).
9. Screw two 8 x 1.25 mm bolts (B) into the disc to push it away from the hub. Turn each bolt two turns at a time to prevent cocking the disc
excessively.
10. Remove the brake disc from the knuckle.
11. Check the front hub for damage and cracks.
12. Remove the cotter pin (A) from the tie-rod end ball joint then loosen the Hot (B).
13. Remove the tie-rod ball joint from the knuckle using the special tool.
14. Remove the cotter pin (A) from the lower arm ball joint castle nut (B), and remove the nut.
15. Remove the lower ball joint from the knuckle using the special tool.
16. Remove the cotter pin (A) from the upper ball joint castle nut (B) and remove the nut.
17. Remove the upper ball joint from the knuckle using the special tool.