Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
3.
Check under the seat to confirm that both seat track latches are engaged. If one of the seat track latches does not engage, sit in the seat and slide
back and forth until the latches engage in the rearmost position.
4.
Torque the two seat track front mounting bolts to 34 N.m (25 lb-ft).
5.
Pull up on the seat track release lever, and move the seat all the way forward; do not use the walk-in lever or the recline lever. Torque the two seat
track rear mounting bolts to 34 N.m (25 lb-ft).
6.
Check the seat for proper operation:
^
If the seat operates properly (slides smoothly and releases easily), reinstall the seat track end covers; the repair is complete.
^
If one of the seat track latches still does not engage, continue to Shimming the Inner Seat Track
Shimming the Inner Seat Track
1.
Move the seat to the rearmost position.
2.
Check under the seat to confirm that both seat track latches are engaged. If the seat track latches do not engage, sit in the seat and slide back and
forth until the latches engage in the rearmost position.
NOTE:
Do not move the seat from this position or use the walk-in or recline levers until this procedure is completed.
3.
Remove the front mounting bolt from the inner seat track. Loosen the other three seat track mounting bolts several turns.
4.
Move the seat back and forth and side to side until you see a gap between the front of the inner seat track and its mounting boss.
