Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Modulator Remove & Install
-
Relieve ABS system pressure. See: Relieving System Pressure
-
Disconnect the modulator unit 14P connector and pump motor 2P connector.
-
Remove the wire harness clip from the modulator bracket.
-
Remove the three 8 mm nuts, and remove the modulator unit from the bracket.
INSTALLATION
Fluid Level Indicator
1. Check whether the brake fluid level in the reservoir is at the MAX (upper) level. If level is low, add fresh brake fluid to the MAX (upper) level.
