Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Brake Hose/Line: Service and Repair
CAUTION:
^ Before reassembling, check that all parts are free of dust and other foreign particles.
^ Replace parts with new ones whenever specified to do so.
^ Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
1. Replace the brake hose if the hose is twisted, cracked, or if it leaks.
2. Disconnect the brake hose from the brake line using a 10 mm flare nut wrench.
3. Remove and discard the brake hose clip from the brake hose.
Remove Brake Line
4. Remove the banjo bolt, and disconnect the brake hose from the caliper.
Specs:
Brake Hose To Brake Caliper (Banjo Bolt) 34 Nm (25 lb.ft.)
Brake Line To Brake Hose 15 Nm (11 lb.ft.)
