Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Cruise Control Servo: Testing and Inspection
Actuator Test
1. Disconnect the actuator cable from the actuator rod, and disconnect the 4-P connector.
2. Connect battery power to the D terminal and ground to the A, B, and C terminals.
Actuator Test
3. Connect a vacuum pump to the check valve. Then apply vacuum to the actuator.
Actuator Test
4. The actuator rod should pull in completely. If the rod pulls in only part-way or not at all, check for a leaking vacuum line or defective solenoid.
Actuator Test
