Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Valve Clearance: Adjustments
NOTE:
-
Valves should be adjusted only when the cylinder head temperature is less than 100°F (38°C).
-
After adjusting, retorque the crankshaft pulley bolt to 245 Nm (181 ft. lbs.).
1. Remove the cylinder head cover.
2. Set No. 1 piston at Top Dead Center (TDC). "UP" mark on the camshaft pulley should be at top, and TDC grooves on the camshaft pulley should
align with the cylinder head surface.
3. Adjust valves on No. 1 cylinder.
-
Intake: 0.26 mm (0.010 inch) +/- 0.02 mm (0.0008 inch)
-
Exhaust: 0.30 mm (0.012 inch) +/- 0.02 mm (0.0008 inch)
