Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
NOTE:
An over-tensioned belt will cause crankshaft failure, usually within a few thousand miles. Make sure the belt tension is correct before releasing the
vehicle to your customer.
23.
Reinstall the upper or middle cover. Torque the bolts to 12 Nm (8.7 lb-ft).
24.
Reinstall the cylinder head cover. Torque the mounting hardware sequentially in two or three steps as specified in the appropriate service manual.
25.
Reconnect the negative cable to the battery.
26.
Enter the audio system anti-theft code, then enter your customer's radio station presets. Set the clock.
27.
Center-punch a completion mark above the last character of the engine compartment VIN.
