Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Crankshaft Main Bearing Seal: Service and Repair
Installation, Engine Not Removed
NOTE:
^
The crankshaft and front balancer shaft oil seal housing surface should be dry.
^
Apply a light coat of grease to the crankshaft, the balancer shaft and to the lips of the seals.
1. Using the special tool, drive in the crankshaft oil seal until the driver bottoms against the oil pump.
When the seal is in place, clean any excess grease off the crankshaft, and check that the oil seal lip is not distorted.
2. Using the special tool, drive in the front balancer shaft oil seal until the driver bottoms against the oil pump. When the seal is in place, clean any
excess grease off the balancer shaft, and check that the oil seal lip is not distorted.
