Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Balance Shaft: Service and Repair
Removal
REMOVE FLYWHEEL OR DRIVE PLATE
Flywheel
Manual Transmission:
Remove the eight flywheel bolts, then separate the flywheel from the crankshaft flange. After installation, tighten the bolts in the sequence shown.
12 x 1.0 mm Bolt Torque: 105 Nm (10.5 kg-m, 76 lb ft)
Drive Plate
Automatic Transmission:
Remove the eight drive plate bolts, then separate the drive plate from the crankshaft flange. After installation, tighten the bolts in the sequence
shown. 12 x 1.0 mm Bolt Torque: 75 Nm (7.5 kg-m, 54 lb ft)
BLOCK DISASSEMBLY PROCEDURE
NOTE: Inspect crankshaft, balance shaft, and connecting rod end play before disassembling block.