Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Distributor: Service and Repair
Installation
Distributor Installation
Distributor Installation
NOTE:
^ Before you install the distributor, bring the No. 1 piston to compression stroke TDC.
1. Coat a new O-ring with engine oil, then install it.
2. Slip the distributor into position.
NOTE: The lugs on the end of the distributor and their mating grooves in the camshaft end are both offset to eliminate the possibility of installing
the distributor 180° out of time.
3. Install the mounting bolts.
4. Connect the connector(s) to the distributor.
5. Connect the ignition wires as shown.
