Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Air Door Cable: Adjustments
Air Mix Cable
1. Disconnect the air mix control cable from the air mix control arm and clamp.
2. Set the temperature control dial to MAX. COOL.
3. Turn the air mix control arm, as shown, then connect the end of the air mix control cable to the air mix control arm.
4. Gently slide the air mix control cable housing back from the end enough to take up any slack in the air mix control cable, but not enough to make
the temperature control dial move, then snap the air mix control cable housing into the clamp.
NOTE: The heater valve cable should always be adjusted whenever the air mix control cable has been disconnected.