honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fresh Air/Recirculation Actuator|Page 7137 > < Symptom Related Diagnostic Procedures|Page 7134
Page 1
background image

Mode Control Motor: Service and Repair
Fresh Air/Recirculation Actuator

1. Disconnect the 4P connector from the recirculation control motor.
2. Remove the two self-tapping screws, recirculation control motor and the flange collar.
3. Install in the reverse order of removal, and after installation, make sure the recirculation control motor runs smoothly.

Fresh Air/Recirculation Actuator|Page 7137 > < Symptom Related Diagnostic Procedures|Page 7134