Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
11. Remove the self-tapping screw and core clamp.
12. Pull out the heater core.
NOTE: Be careful not to bend the inlet and outlet pipes during heater core removal.
13. Assemble heater unit in the reverse order of disassembly.
14. Install in the reverse order of removal. Make note of the following items:
-
Apply sealant to the grommets.
-
Do not interchange the inlet and outlet heater hoses. Make sure that the clamps are secure.
-
Loosen the bleed bolt on the engine, and refill the radiator and coolant reservoir with the proper engine coolant mixture. Tighten the bleed bolt
when all the trapped air has escaped and engine coolant begins to flow from it.
-
Connect all cables, and make sure they are properly adjusted.
