Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
A/T Gear Position Switch: Service and Repair
A/T Gear Position Switch Replacement
1. Remove the front console, then disconnect the 12-P and 2-P connectors from the switch.
2. Remove the two mounting nuts and the switch.
3. Position the slider of the new switch to [P] as shown above.
4. Shift the lever to the [P] position.
5. Attach the switch, and tighten the two mounting nuts.
6. Test the switch in the [P] and [N] positions.
NOTE: The engine should start when the shift lever is in [P] anywhere within the range of free play.
7. Connect the 12-P and 2-P connectors, clamp the harness, and install the console.
