Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Fuel Pressure Release: Service and Repair
Before disconnecting fuel pipes or hoses, release pressure from the system by loosening the 12 mm sealing nut on side of the fuel rail.
WARNING:
-
Do not smoke while working on the fuel system. Keep open flames or sparks away from your work area.
-
Be sure to relieve fuel pressure while the ignition switch is off.
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable from the battery negative terminal.
3. Remove the fuel fill cap.
4. Use a box end wrench on the 12 mm sealing nut at the fuel rail.
5. Place a rag or shop towel over the 12 mm sealing nut.
6. Slowly loosen the 12 mm sealing nut one complete turn.
NOTE: Replace all washers whenever the 12 mm sealing nut is loosened or removed.
