Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Power Door Lock Control Module: Testing and Inspection
With Keyless Entry
Control Unit Input Test (With Keyless Entry)
Control Unit Input Test (With Keyless Entry)
1. Slide the driver's seat forward.
2. Leave the harness connected and make the test shown by probing the back of the connectors.
3. Inspect the connector terminals to be sure they are all making good contact.
^ If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
^ If the terminals look OK, make the following input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace it.
