Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Air Bag(s) Arming and Disarming: Service and Repair
Before removing the airbag or SRS related devices (the SRS unit and the cable reel), disconnecting connectors from SRS related devices, or removing
the dashboard or the steering column, disconnect the airbag connectors from the airbags to prevent accidental deployment.
Turn the ignition switch OFF and disconnect the negative cable from the battery, and wait at least three minutes before beginning the following
procedures.
Before disconnecting the SRS main harness (A) from the SRS unit, disconnect both airbags (C, D).
Before disconnecting the cable reel 2P connector (B), disconnect the driver's airbag 2P connector (C).
1. Disconnect the negative battery cable, and wait at least three minutes.
Driver's 2p Connector
Driver's Airbag
2. Remove the access panel from the steering wheel, then disconnect the driver's airbag 2P connector (A) and cable reel 2P connector (B).
