Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Alternator Belt Inspection And Adjustment (With A/C)
Belt Tension Gauge Method:
Following the gauge manufacturer's instructions, attach the belt tension gauge to the belt, and measure the tension.
Tension: 441-588 N (45-60 kgf, 99- 132 lbf)
NOTE: On a brand-new belt, (one that has been run for less than five minutes), the tension should be 932 - 1123 N (95 - 115 kgf, 209 - 254 lbf)
when first measured. If the belt is worn or damaged, replace it.
If adjustment is necessary:
1. Loosen the through bolt and adjustment locknut.
2. Turn the adjusting bolt to obtain the proper belt tension, then retighten the nut and through bolt.
3. Recheck the tension of the belt.
Without A/C
Alternator Belt Inspection And Adjustment (Without A/C)
Deflection Method:
