Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Power Steering Fluid: Service and Repair
FLUID REPLACEMENT
NOTE: Check the reservoir at regular intervals, and add the recommended fluid as necessary.
CAUTION: Always use Genuine Honda Power Steering Fluid-V or S. Using any other type of power steering fluid or automatic transmission fluid can
cause increased wear and poor steering in cold weather.
1. Raise the reservoir, then disconnect the return hose to drain the reservoir.
2. Connect a hose of suitable diameter to the disconnected return hose, and put the hose end in a suitable container.
CAUTION: Take care not to spill the fluid on the body and parts. Wipe off any spilled fluid at once.
3. Start the engine, let it run at idle, and turn the steering wheel from lock-to-lock several times. When fluid stops running out of the hose, shut off the
engine. Discard the fluid.
4. Reinstall the return hose on the reservoir.
5. Fill the reservoir to the upper level line.
6. Start the engine and run it at fast idle, then turn the steering from lock-to-lock several times to bleed air from the system.
7. Recheck the fluid level and add some if necessary.
CAUTION: Do not fill the reservoir beyond the upper level line.
