Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
13. Apply clean power steering fluid to the vanes and cam ring.
14. Install the 68.5 x 1.9 mm O-ring on the pump cover.
15. Align the roller set holes in the pump cover with the rollers.
16. Align the projection on the pump housing and the projection on the pump cover, and tighten the four bolts.
17. Set the 13 x 1.9 mm O-ring on the inlet joint.
18. Install the inlet joint on the pump housing.
19. Align the pin of sub valve with the oil passage in pump housing and push down the sub-valve. Fix the sub valve with snap ring.
20. Rotate the pump drive shaft manually and make sure the pump drive shaft rotates smoothly.
