Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
7. Install the damper fork over the driveshaft and onto the lower arm. Install the front damper in the damper fork so the aligning tab is aligned with
the slot in the damper fork.
8. Loosely install the flange bolt into the damper fork.
9. Loosely install a new self-locking nut with the flange bolt.
10. Raise the steering knuckle with a floor jack until the vehicle just lifts off the safety stand. The floor jack must be securely positioned or personal
injury may result.
11. Tighten the flange bolt.
12. Tighten the self-locking nut.
13. Tighten the flange nuts on the top of the front damper to the specified torque.
14. Install the brake hose mounts with the brake hose mounting bolts.
15. Install the front wheel.
