Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
Shift Control Solenoid Valve: Service and Repair
NOTE: Shift control solenoid valves A and B must be removed/replaced as an assembly.
1. Remove the mounting bolts and shift control solenoid valve assembly.
2. Check the shift control solenoid valve fluid passages for dust or dirt, and replace as an assembly, if necessary.
3. Clean the mounting surface and fluid passages of the shift control solenoid valve assembly, and install a new filter/gasket.
4. Check the connector for rust, dirt or oil, then reconnect the connector securely.
