Accord SE Coupe L4-2156cc 2.2L SOHC MFI (1997)
4. If not perfectly aligned, loosen the locknut on the cable adjuster, and adjust as required.
5. Tighten the locknut.
6. Install the lock pin on the adjuster. If you feel the lock pin binding as you reinstall it, the cable is still out of adjustment and must be readjusted.
7. Make sure the lock pin is seated securely in the adjuster.
8. Move the shift lever to each gear, and verify that the A/T gear position indicator follows the A/T gear position switch.
9. Start the engine and check the shift lever in all gears.
10. Insert the ignition key into the key cylinder on the A/T gear position indicator panel, and verify that the shift lock lever is released.
