Accord Sedan L4-2.2L SOHC (16 Valve) (1996)
9.
Remove the four Torx-head bolts from the front of the inner seat track. Then, separate the seat frame from the track, and pull the track out so you
have enough clearance to install the new cable.
10.
Put its cover back on and reinstall the new cable. First, insert one end into the inner seat track motor; then insert the other end into the driven hole
on the outer track.
11.
Reinstall the seat frame into the track, then reinstall the Torx bolts and tighten them to 8-10 N.m (6-7 lb-ft).
12.
Carefully place the seat in the car, and reconnect the electrical connectors.
13.
Reinstall the seat bolts, and tighten them to 34 N.m (25 lb-ft).
14.
Test the operation of the seat, then reattach the seat track end covers.
PARTS INFORMATION
Seat Track Synchronizer Cable and Cover:
P/N 81510-SV1-999, H/C 5165048
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.