Accord Sedan L4-2.2L SOHC (16 Valve) (1996)
/Page-1330003.png)
13. Inspect the outboard joint for faulty movement and wear. If any roughness or excess play is felt, replace the outboard joint.
ASSEMBLE
NOTE:
-
Clean the disassembled parts with solvent, and dry them thoroughly with compressed air. Do not wash the rubber parts with solvent.
-
Thoroughly pack the inboard joint and both joint boots with the joint grease included in the new driveshaft set. Grease quantity: Inboard Joint
120 - 130 g (4.2 - 4.6 oz) and Outboard Joint 130 -140 g (4.6 - 4.9 oz)
