Accord Sedan L4-2.2L SOHC (16 Valve) (1996)
7. Fit the rollers to the spider with their high shoulders facing outward.
NOTE:
-
Reinstall the rollers in their original positions on the spider by aligning the marks.
-
Hold the driveshaft pointed up to prevent the rollers from falling off.
8. Pack the inboard joint with the joint grease included in the new driveshaft set. Grease quantity: 120 - 130 g (4.2 - 4.6 oz)
9. Fit the inboard joint onto the driveshaft.
NOTE:
-
Reinstall the inboard joint onto the driveshaft by aligning the marks on the inboard joint and the rollers.