honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

ABOUT US
Engine Mount Control Solenoid Valve <--> [Engine Mount Control Solenoid] > < Wheel Fastener|Specifications

Accord Sedan V6-2.7L SOHC (24 Valve) (1996)

  • Engine, Cooling and Exhaust
  • Engine
  • Actuators and Solenoids - Engine
  • Engine Mount Diaphragm Actuator <--> [Engine Mount Control Actuator]
  • Component Information
  • Testing and Inspection

Page 1
background image

Engine Mount Diaphragm Actuator: Testing and Inspection

1. Disconnect the vacuum hose from the solenoid valve, and remove the rear mount.
2. Clean and oil the diaphragm actuator rod, rear mount rotor lever, and lever linkage.

3. With a vacuum pump/gauge, apply vacuum of about 30.7 kPa (230 mm Hg, 9.1 in.Hg.), and check if the rotor lever turns 80 degrees.

-

Replace the rear mount if the rotor lever does not operate.

  • Engine, Cooling and Exhaust
  • Engine
  • Actuators and Solenoids - Engine
  • Engine Mount Diaphragm Actuator <--> [Engine Mount Control Actuator]
  • Component Information
  • Testing and Inspection

Engine Mount Control Solenoid Valve <--> [Engine Mount Control Solenoid] > < Wheel Fastener|Specifications