Accord Sedan V6-2.7L SOHC (24 Valve) (1996)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
NOTE: When installing and tightening the pulley, follow the procedure below.
1. Clean, remove any oil and lubricate points shown.
^
Tighten the 16 X 1.5 mm crankshaft pulley bolt to 245 Nm (181 ft. lbs.)
NOTE:
^
Do not use an impact wrench when installing.
^
Make sure the thumb screw in the handle aligns with the hole in the holder attachment.