Accord Sedan V6-2.7L SOHC (24 Valve) (1996)
A/T Gear Position Signal: Adjustments
A/T Gear Position Switch Test/Adjustment
1. Shift to [P] and loosen the mounting nuts.
2. Slide the switch rearward (up to 2.0 mm (0.08 in)] until there is continuity between the "F" and "I" terminals within the range of the shift lever.
3. Recheck for continuity between the terminals.
NOTE:
-
If adjustment is not possible, check for a damaged shift lever detent and/or bracket. If there is no damage, replace the A/T gear position switch.
-
The engine should start when the shift lever is in [P] anywhere within the range of free play.